Electric Fireplace Wall Hanging Ideas
The wall-mount electric fireplaces are ready to use straight out of their box. They're a great way to add ambience without venting or remodeling.
However, they often require care in installation due to the fact that they're generally heavy. Follow these steps to hang your new electric fireplace in the correct way.
1. Connect the Brackets
A wall-mounted or recessed electric fireplace instantly elevates the look of any room. It's the perfect solution for homes that don't have an existing fireplace opening or for apartment living.
First, you must decide where to install your new electric fire. You should choose a place that is not susceptible to moisture and at least at least a few feet away from furniture and drapes. Once you've found a spot, mark the wall with lines for the top and bottom plates of the fireplace frame.
Use a tool, such as a drill to make exploratory holes in the wall, examining for studs using a stud detector and marking on the drywall for fireplace mounting bracket locations. Then patch and paint the drywall or make the wall a bit bigger to prepare it for fireplace installation.
Depending on your chosen wall-mounted fire, you may either need to fit the screen and firebox as one unit or separate them by an adjustable wall bracket. If you're not sure of your abilities to manage this task on your own, you might consider hiring a general contractor or experienced carpenter.
Most electric fireplaces come with templates for the installation process, but you should also have an emery board and a pencil to help precisely mark the area in which you'll mount the wall brackets. Utilize the template to make sure that the power cable from the fireplace will be connected to a nearby outlet in order to connect it.
Once the studs and fireplace frame are in place, you can then install drywall that is as smooth and flush as possible for a clean appearance. Add trim to the bottom edge and paint, sand and finish the frame.
The majority of wall-mounted electric fires have slots or hooks on the back of the unit that you insert into slots or hooks on the mounting brackets. Make sure you make sure that the slots or hooks are aligned before connecting the fire brackets. Once the fire is set you can add other elements such as driftwood logs, crystal embers or decorative rocks.
2. Check the Bottom Bracket
The space that is above a fireplace mantel, chimney breast or mantel is a prime spot for hanging artwork. There is a fine balance between an artistic arrangement and one that does not detract from the overall look of the fireplace.
A general rule of thumb is that a picture should be 80% of the width of the fireplace or mantel it is placed over. This will help it to remain proportionate & appear pleasing on the wall. Other decorative ornaments and accessories placed on the mantel can affect the size and proportional guidelines.
If you intend to display a photo above your electric fireplace, the frame should be made of glass or another material that can withstand high temperatures. If you're unsure whether the frame is suitable, a quick test using a temperature-sensitive cloth will show whether the frame is suitable for this type of application.
A common concern with the display of artwork over the fireplace is the possibility of causing damage to the artwork due to smoke or heat that escapes. This is not a problem with gas or wood-powered fireplace. However when you are planning to install an electric wall-mounted fire it is essential to follow the instructions provided by the manufacturer.
The majority of electrical fires come with mounting brackets that can be attached to the wall by hanging screws or wall-mounted fixing systems. It is recommended to drill exploratory hole in an area that is distinct from the wall prior to mounting your electric fire. After that you can utilize a cable finder and pipe to check that there are no pipes or cables within the vicinity of the position you've chosen for mounting.
If so, you could place your fire on the electrical socket or move it to a different location. If you decide to move it to a different location it is important to ensure that the power cable be able to connect from the fire to the electrical socket. this is crucial for older homes or houses with solid walls. If you don't do this, your electric fireplace won't work properly. Some models include a template that will show you where to drill the holes for this purpose, while others require a spirit level & pencil to mark the proper locations on your wall.
3. Connect the Power Cord
If you've installed a recessed electrical fireplace, you might need to relocate the plug socket from the wall to behind the fireplace. This can create a sleeker appearance. First test the fireplace to ensure it functions correctly.
The third method of mounting an electric fireplace is by framing the space and constructing it into the wall. This gives a finished, traditional look and allows you to build an additional mantel. The owner's manual for the particular model will include information about framing, securing the fireplace, and wiring.
When wall mounted electric fires uk to install your new wall-mounted electric fireplace begin by marking the location of installation with a marker or pencil. Then you can use a carpenter's degree to ensure that the location is flat and level. You can also employ a stud finder to mark the location of studs so that you are sure that you're drilling into a safe area.
After you've marked your location for installation and marked the location, use your drill to make holes for the hanging screws or bracket screws. Make sure you adhere to the exact directions in your owner's manual for this procedure, especially when you're installing the fireplace in a wall. If you're not sure of how to do this, you can always ask a professional to handle the installation for you.
You can also hide power cords from view by using an organizer kit for cables. These kits usually include sleeves, clips, or boxes to bundle cables. You can make use of fish tape or wire snakes to guide the cords. If you'd rather not cut into your drywall or drywall, you can install a power bridge kit for more secure and cleaner connections.
You can also disguise cords with paintable wire covers, or by tacking them to the wall. Keep the cover or tacks away from sources of heat. This will shield the cord from being damaged and will also prevent accidental contact.
4. Connect the Adapter
A wall-mounted electric fireplace is a great option for home renovations or for those who don't have the space or funds to build a gas fireplace. They are easy to install and can be used straight out of the box. They are a wonderful alternative for those looking for a stylish modern design or the warmth the fire can bring. These units are designed to be hung as artwork on any wall. They can be recessed, or not at all recessed and are fully electric and have heating powered by fans.
Before you begin the actual installation process it's a good idea to take stock of all the equipment and tools you will need. Go through the user's manual for specific information on how to mount your electric fire. Certain models require you to screw brackets directly into the wall, while others may feature an installation plate that slides into slots or hookeds on the brackets. If hole in the wall electric fires are installing a recessed unit, it's important to ensure that all combustible materials are removed from the area around the installation. As a rule it is recommended to keep these materials at a minimum of 3 feet from the front of the fireplace.
After you've inspected all the components, you need to plug in your electric fireplace and make sure that it is working correctly. This is an important step because it will guarantee that the flame effect screen and heater work as intended. This will also give you an idea of how the finished product will appear in its final location.
When you're sure that your electric fire is working properly, you must think about covering the power cord. This will help to keep the finished product neat and tidy. It is possible to do this by applying paintable wire covers, or you can choose to install an outlet that will allow you to place the cord behind the unit. This will provide seamless finishing to your fireplace.
